Helpdesk
Login

RSS Feed
Knowledgebase : Maintenance Kit Reset Procedures.
To Complete Installation: After a maintenance kit is installed, the maintenance kit counter must be reset. 1 When printer is on, press the Home to enter into the menus. 2 Select Administration > Manage Supplies > Reset Supplies > New Maintenan...
To complete installation: To clear the ‘PERFORM USER MAINTENANCE’ message and reset the maintenance page count; • Hold down the left side of the ITEM and VALUE buttons while turning the printer on. • Wait for “Reset Maintenance Count” to be ...
To complete installation: To clear the ‘PERFORM USER MAINTENANCE’ message and reset the maintenance page count; • Hold down the left side of the ITEM and VALUE buttons while turning the printer on. • Wait for “Reset Maintenance Count” to be ...
After a maintenance kit is installed, the maintenance-kit counter must be reset. 1 Turn the printer off. 2 Hold down (SELECT button), and then turn on the printer power. Continue holding down until all three printer control-panel lights flash on...
After a maintenance kit is installed, the maintenance-kit counter must be reset. 1 Turn the printer off and then on. When 000MB (the beginning of the memory-count) appears on the control-panel display, press and hold down SELECT button (). Conti...
Clearing The “PERFORM PRINTER MAINTENANCE” Message (If Displayed): 1 Turn the printer on and wait until “PERFORM PRINTER MAINTENANCE” is displayed. 2 Press the GO button so that its green indicator goes off and “OFFLINE” is displayed. 3 Pres...
Reset the Maintenance Counter (when PERFORM PRINTER MAINTENANCE is displayed): 1 Turn off the printer. 2 Press and hold the Select ( ) button (the 6 button on MFP’s). 3 Turn on the printer. 4 Continue to hold the Select ( ) button until all ...
After a maintenance kit is installed, the maintenance kit counter must be reset. 1 When printer is on, press the Home button to enter into the menus. 2 Scroll down to Device Maintenance, press OK button. 3 Select Service, press OK button. 4 ...
1 Turn the printer off and then on. When 000MB (the beginning of the memory-count) appears on the control-panel display, press and hold down OK button. Continue holding down OK button until all three printer control panel lights ash once, and th...
1. Hold down the left side of the ITEM and VALUE buttons while turning the printer on. 2. Wait for “Reset Maintenance Count” to be displayed and then release both keys.
  1 Turn printer power off. 2 Press and hold down the Go and Return buttons while powering on the printer until the display reads PERFORMING SELF TEST. When ready, the display will read REGISTRATION. 3 Scroll to PRINTER SETUP and press the S...
To Clear the ‘80 Scheduled Maintenance’ Message and Reset the Maintenance Page Count Optra T/T630/T632/T634 1 Turn printer power off. 2 While pressing and holding Select and Return buttons, turn the printer power on. Press GO button and the ...
Maintenance Page Counter Reset: 1 After replacing the kit, the maintenance count must be reset to zero to clear the “80 Scheduled Maintenance” message. 2 Enter the Conguration Menu. With the printer off, press and hold the Select (-) and Right...
Maintenance Page Counter Reset: 1 After replacing the kit, the maintenance count must be reset to zero to clear the “80 Scheduled Maintenance” message. 2 Enter the Conguration Menu. 3 With the printer off, press and hold the Select (-) and Rig...