Helpdesk
Login

Lexmark T640/T642/T644 Maintenance Kit Reset Procedure
Posted by Ed Dayton, Last modified by Ed Dayton on 06 December 2017 03:35 PM

Maintenance Page Counter Reset:

1 After replacing the kit, the maintenance count must

be reset to zero to clear the “80 Scheduled Maintenance”

message.

2 Enter the Conguration Menu.

With the printer off, press and hold the Select (-)

and Right Arrow (>) buttons.

3 Turn on the printer and release the buttons after

ten seconds.

4 The message CONFIG MENU displays on the

top line of the operator panel. Select Reset Maint

Cnt from the Conguration menu, and then

select Reset.

5 When the reset operation is complete, the display

returns to the Conguration menu.

6 Power the printer off and on to exit the conguration

menu and resume normal operation.

(0 vote(s))
Helpful
Not helpful


Comments (0)